End User Product Specification

RoHS-Compliant PS/2 MOUSE-TRAK Professional Trackball
Model B-5XXMP-XROHS

1.0   Scope:

This specification describes the functional, physical, and environmental characteristics of the PS2 MOUSE-TRAK Professional.

2.0   Functional:

2.1	Resolution:	192 to 576 pulses per revolution of the ball.
2.2	Input Switches:	Three (3)
2.3	Interface:	IBM PS/2
2.4	Connector:	6-Pin Mini-DIN Male
2.5	Pin Assignments:	Pin 1 = PS/2 Data Pin 2 = NC Pin 3 = Common Pin 4 = +5V Pin 5 = PS/2 clock Pin 6 = NC
2.6	Compatibility:	Microsoft PS/2 Mouse Protocol, Logitech PS/2 Mouse Protocol
2.7	OS Compatibility:	Microsoft Windows 95, Windows 98, Windows ME, Windows 2000, Windows XP (32-bit and 64-bit), Windows 2003 (32-bit and 64-bit). Linux distributions which support PS/2 mouse devices.
2.8	Switches:	Mechanically limited, break resistant
2.9	Cable:	96"+-0.5"
2.10	Power Consumption:	Idle: 8mA Max: 12mA

3.0   Mechanical:

3.1	Dimensions:	Approximately 4"wide x 8" long
3.2	Weight:	1.3 lbs.
3.3	Body Material:	ABS, beige
3.4	Ball Material:	Cast Phenolic Resin
3.5	Ball Hardness:	Rockwell H 85
3.6	Tracking Force:	1.5 oz. maximum, 0.5 oz. typical (15g)
3.7	Ball Load:	25 lbs. maximum downward
3.8	Ball Speed:	500 RPM maximum
3.9	Hand Pad:	Injection-molded vinyl, grey

4.0   Environmental:

4.1	Operating Temperature:	0 to +50 degrees Celsius
4.2	Storage Temperature:	-20 to +60 degrees Celsius
4.3	Humidity:	0 to 95% non-condensing

5.0   Accessories:

None

6.0   Documentation:

Included instruction manual

7.0   Labeling:

Standard MOUSE-TRAK labeling. UPC ID and barcode. Serial Number and Code39 barcode.

8.0   Packaging:

Each unit is packaged in an individual, protective container which may display a bar-coded label of the customer's specification

9.0   Special Features:

9.1	Right/Left-handed modes:	Yes. See manual for programming instructions
9.2	Programability:	Middle Key: The middle key may be set for the auxiliary function, a primary click-and-drag, or a primary double-click. See manual for programming instructions. Right (Secondary in right-handed mode) Key: The right key may be set for either secondary click or secondary click-and-drag. See manual for programming instructions. Programming Note: Programming will reset to factory default if the MOUSE-TRAK receives a reset signal from the host computer.

10.0   Downloadables:

10.1	Cable Assembly Drawing:	AutoCAD DWG (67K) PNG Image (26K)
10.2	Unit Assembly Drawing:	AutoCAD DWG (73 K) PNG Image (39 K)
10.3	CE Mark Certification/ EU Declaration of Conformity:	Adobe PDF (431 K)
10.4	Certificate of RoHS Compliance:	Adobe PDF (70 K)

©2010 ITAC Systems, Inc. All Rights Reserved.